product description: The automatic tracking and positioning jet fire extinguishing device uses the spectral rays released by the combustible substances in nature as targets, and uses a special red ultraviolet detection system to monitor the ignition source rays to detect the occurrence and existence of fire. Adopting advanced red ultraviolet flame detection system, central computer control system and mechatronic system, it can automatically monitor all fire conditions in its protected area in all weather and all directions.
装置立即启动，发出信号到消防控制中心，实行报警，同时全方位地进行巡回扫描寻的，精确定位，并驱动灭火装置把喷口迅速准确地瞄准火源，继而自动启泵、开阀，把灭火剂及时、准确地喷向着火点，瞬时间即可把刚刚初燃的火源扑灭，若有新的火源，灭火装置将重复上述灭火过程，待全部火源扑灭后又重新回到监测状态。 In the event of a fire, the large-scale automatic fire water monitor device is immediately activated, sends a signal to the fire control center, implements an alarm, and simultaneously performs a round-robin scan to find the exact location, and drives the fire extinguishing device to quickly and accurately aim the nozzle at the fire source Then automatically start the pump and open the valve, spray the fire extinguishing agent to the ignition point in time and accurately, and immediately extinguish the newly ignited fire source. If there is a new fire source, the fire extinguishing device will repeat the above fire extinguishing process and wait for all fires After the source is extinguished, it returns to the monitoring state. Make sure that the signs of the fire are extinguished in the early stage, so that it cannot become a disaster, and truly "prevent problems before they occur"!
探测距离远，保护面积大，喷射距离远，喷洒流量大，灵敏度高，响应速度快，智能化、自动化水平高，灭火时间短等众多优点，全方位监控，无死角、无盲区、误报误动率极低的特性，能够极大地消除火灾给人们带来的危害，为保护人民的财产和自身生命安全不再遭受到火灾的困扰作出贡献。 Automatic tracking and positioning jet fire extinguishing device has long detection distance, large protection area, long spraying distance, large spray flow, high sensitivity, fast response speed, high intelligence, high automation level, short fire extinguishing time, and many other advantages. Comprehensive monitoring, no dead angle, The characteristics of no blind zone and extremely low rate of false alarms can greatly eliminate the harm caused by fires, and contribute to protecting people's property and their own lives from being affected by fires. Features: Linkage with other fire alarm systems Using gun-borne image technology to realize remote visual fire suppression Automatically detect alarms and locate fires With automatic control, remote manual control and on-site manual control functions Long detection distance, large protection area, fast response speed and high detection sensitivity Automatic positioning and remote fixed-point fire extinguishing, reducing the losses caused during the extinguishing process The system can have fire prevention, fire extinguishing and monitoring functions at the same time, which improves the reliability of the system Scope of application: Factory workshop, warehouse logistics Exhibition building: convention center, exhibition hall, etc .; Sports buildings: sports venues, training venues, etc .; Rehabilitation buildings: large hospitals, nursing homes, rehabilitation centers, etc .; Office buildings: large office buildings, office buildings, business buildings, etc .; Cultural buildings: cultural centers, museums, libraries, art galleries, etc .; Commercial buildings: large shopping malls, supermarkets, shopping malls, indoor commercial streets, etc .; Industrial buildings: large industrial plants and warehouses, buildings that produce and store Class A items; Rehearsal building: song and dance theater, concert hall, cinema, auditorium, memorial hall, funeral home, etc .;
Passenger buildings: Passengers waiting at passenger terminals such as airports, railway stations, bus stations, and terminals.
| model || ZDMS0.8 / 10S-ZQ / Automatic tracking positioning jet fire extinguishing device |
| ZTZ-212 |
| Monitoring radius || 40m |
| Jet radius || 39m |
| Maximum protection radius || 35m |
| Limited Data || 10L / S |
| Installation height || 6m-22m |
| Connection size || DN50 flange |
| Fixed work stress || 0.8MPa |
| Working pressure || 1.0MPa |
| Voltage / power || AC220V / monitor 5W, scan 50W |
| communication method || RS485 |
| Response time || ≤30s |
| Horizontal rotation angle || 360 ° |
| Vertical rotation angle || Depth -90 °, elevation + 30 ° |
| Water spray method || Swing back and forth after direct shot |